How to fix Stihl Paint Sprayer when there is no spray from nozzle?
If your Stihl Paint Sprayer isn't spraying from the nozzle, it's likely that the hose and wand system is blocked. To fix this, rinse and clean all parts of the hose and wand system with clean water. This includes the spray gun, the filter in the handle, the spray wand, and the hose itself.
What to do if pumping action produces no pressure in Stihl SG 20?
If the pumping action on your Stihl Paint Sprayer isn't producing any pressure, it could be due to no suction. You should fit a new O-ring on the piston. Also, check that the balls in the pump housing are properly seated and not sticking.
Why is liquid leaking from top of pump when pumping Stihl SG 20 Paint Sprayer?
If liquid is leaking from the top of the pump when you're pumping your Stihl Paint Sprayer, it's probably because the O-ring on the piston is worn. The solution is to fit a new O-ring on the piston.
What to do if lever falls down under own weight on Stihl Paint Sprayer?
If the lever of your Stihl Paint Sprayer falls down under its own weight, it indicates that the ball (intake side) is sticking. To resolve this, remove the hose from the bottom of the pump housing and take out the ball. Clean the ball and make sure it moves freely.
Why does the lever move upwards of its own accord on Stihl SG 20?
If the lever of your Stihl Paint Sprayer moves upwards on its own, the ball (delivery side) is likely sticking. To fix this, open the screw plug in the pump housing and take out the ball. Clean the ball and ensure it moves freely.
STIHL's philosophy of continuous product improvement may lead to unannounced changes.
Ensures the operator is in good physical and mental condition and aware of fatigue.
Guidance on how to hold and control the sprayer for safe and effective operation.
Specifies operating in well-ventilated areas and good visibility.
General| Brand | Stihl |
|---|---|
| Model | SG 20 |
| Category | Paint Sprayer |
| Language | English |
To Next Page
