SG 20
English
10
Spraying
N Pull the spray gun's lever (1).
N Operate the hand lever 3 to 6 times
per minute to maintain a uniform
spray pressure.
N Rotate the nozzle (2) to adjust the
spray pattern.
For continuous operation:
N Pull the trigger.
N Engage the U-clip (3) in direction of
the arrow – the trigger is locked.
N Empty the tank in a well-ventilated
location.
N Dispose of any residual spray
solution in accordance with
environmental requirements –
follow instructions of the chemical
manufacturer.
N Rinse the tank with clean water.
N Fill the tank with about 1 1/4 gal.
(5 liters) of clean water, pump and
spray until the tank and hose
system are empty and no longer
under pressure. Do not store the
sprayer under pressure or with
spray solution in the tank.
N After finishing work, clean the
filter (1) in the spray gun.
Storing the Machine
To Next Page
Loading...
Need help?
General
