SG 20
English
11
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily working time is
longer or operating conditions are difficult (very dusty work area, etc.), shorten the specified
intervals accordingly.
before starting work
after finishing work or daily
weekly
monthly
every 12 months
if problem
if damaged
if required
Complete machine
Visual inspection (condition, leaks) X
Clean X
Filter in spray gun Clean XX
Tank, pipe and hose system
Drain X
Clean X
Tank, pressure vessel, pipe and hose system Visual inspection (condition, leaks) X
Pump piston Lubricate with oil XX X
Gasket in cap Lubricate with grease XX
Vent in cap Clean X
All accessible screws and nuts Retighten X
Safety labels Replace X
To Next Page
Loading...
Need help?
General
