SG 20
English
9
N Fit the strainer (1).
N Stand the sprayer on a level
surface.
N Fill up with thoroughly mixed spray
solution – do not overfill (no further
than max. mark – arrow).
N Gasket (2) in the cap (3) must
always be well lubricated with
grease and in good condition.
N Fit the cap and tighten it down
firmly.
Before Spraying
N Oil the pump piston (1).
N Put the sprayer on your back.
N Operate the hand lever (2) slowly
and steadily with the gun closed – 8
to 10 strokes are required to build
up pressure.
Filling the Tank Spraying
To Next Page
Loading...
