What to do if the Stihl Paint Sprayer nozzle doesn't spray but the tank pressure is OK?
If the nozzle of your Stihl Paint Sprayer isn't spraying despite adequate tank pressure, the nozzle, spinner insert, or filter might be blocked. Try cleaning the nozzle, spinner insert, and/or filter to resolve the issue.
How to fix jet only spray on Stihl Paint Sprayer?
If the spray from your Stihl Paint Sprayer is coming out as a jet instead of an atomized spray, it's possible that the spinner insert in the nozzle is missing. You should fit the spinner insert back into the nozzle.
How to fix Stihl Lawn and Garden Equipment when pumping action produces no pressure?
If the pumping action on your Stihl Lawn and Garden Equipment isn't producing any pressure, it could be due to a few reasons. First, check if the pump isn't tightened down properly; if so, lock the pump handle and tighten it down. Alternatively, the O-ring on the pump or the piston cup seal might be damaged. In these cases, install a new O-ring or a new piston cup seal, respectively.
Why is liquid entering the pump of my Stihl Lawn and Garden Equipment?
If liquid is entering the pump of your Stihl Lawn and Garden Equipment, it's likely that the valve disk is either dirty or damaged. You should clean or replace the valve disk to fix this issue.
Why is the spray from my Stihl Lawn and Garden Equipment not atomized?
If your Stihl Lawn and Garden Equipment is only producing a jet of spray and not atomizing it, the spinner insert in the nozzle is likely missing. Fit the spinner insert back into the nozzle to fix this.
What to do if Stihl SG 31 nozzle doesn't spray but the tank has pressure?
If your Stihl Paint Sprayer has pressure in the tank but the nozzle isn't spraying, the nozzle, spinner insert, or filter might be blocked. Try cleaning the nozzle, spinner insert, and filter to resolve the issue.
How to fix Stihl Paint Sprayer when pumping action produces no pressure?
If the pumping action on your Stihl Paint Sprayer isn't producing any pressure, there could be a few reasons. First, the pump might not be tightened down properly; lock the pump handle and tighten it securely. Alternatively, the O-ring on the pump could be damaged, in which case you should install a new O-ring. Finally, the piston cup seal might be damaged, so you may need to install a new piston cup seal.
Why is liquid entering the pump of my Stihl SG 31?
If liquid is entering the pump of your Stihl Paint Sprayer, the valve disk may be dirty or damaged. You should clean or replace the valve disk.
How to fix Stihl Paint Sprayer when it only produces a jet and the spray is not atomized?
If your Stihl Paint Sprayer is only producing a jet and the spray is not atomized, the spinner insert in the nozzle might be missing. Fit the spinner insert into the nozzle.
Why is there no pressure when pumping my Stihl Paint Sprayer?
If the pumping action of your Stihl Paint Sprayer isn't building any pressure, it could be due to a few reasons. First, make sure the pump is properly tightened down by locking the handle and tightening it. If that doesn't work, the O-ring on the pump may be damaged, requiring a replacement. Alternatively, the piston cup seal might be damaged, which would also need replacing.
Details required protective clothing and equipment for safe operation.
Advises on reading chemical instructions and safe handling.
Instructions for safely mixing chemicals and filling the tank.
Guidelines for safe spraying conditions and avoiding damage.
Safety tips and precautions during spraying.
Step-by-step guide to assemble the sprayer.
Overview and function of the sprayer's controls.
Step-by-step guide to build pressure in the container.
How to release pressure from the container.
Steps to safely fill the sprayer container.
Schedule and procedures for routine maintenance.
Lists common problems, causes, and remedies.
General| Volume | 5 L |
|---|---|
| Material | - |
| Product color | Black, Orange, White |
| Quantity per pack | 1 pc(s) |
Weight and Dimensions| Weight | 1800 g |
|---|
To Next Page
