SG 31
English
11
N Completely depressurize the tank.
N Unscrew the pump from the tank.
N Drain the tank in a well-ventilated
location – collect remaining solution
in a suitable container.
Dispose of any residual spray solution in
accordance with environmental
requirements – follow instructions of
chemical manufacturer.
N Rinse the tank with clean water.
N Fill the tank with clean water, pump
and spray until the tank is empty
and completely depressurized.
N Wipe down the whole unit with a
damp cloth.
N Keep tank and pump separate for
drying and storage.
N Dry the unit and store it in a place
protected from direct sunlight and
frost.
Pump
Removing
N Unscrew the pump from the
container.
N Hold pump firmly by the cylinder
barrel and unlock the pump handle.
N Pull the pump handle (1) out of the
cylinder barrel (2) as far as stop.
N Pull pump handle and rotate it
counterclockwise until the gland (3)
is released from the cylinder barrel.
N Pull the piston rod (4) out of the
cylinder barrel.
After Spraying Storing the Machine Inspection and Maintenance
by User
To Next Page
Loading...
