SG 31
English
10
The tank must not be under pressure.
N Unscrew the pump from the tank.
N Stand the tank securely on a level
surface.
N Pour thoroughly mixed spray
solution through the opening
(arrow) – do not exceed maximum
capacity (check max mark on
scale).
N Screw the pump into the tank.
Visual Inspection
Do not operate your unit if any of its
components are damaged. It is
particularly important to check the
solution container and hose connections
for leaks.
Spraying
N Build up pressure – move the pump
handle up and down several times
until the piston manometer shows
the required working pressure – see
"Pressures / Spray Rates" below.
N Lock the pump handle.
Working Pressures / Spray Rates – see
"Specifications".
N Put the strap over your left shoulder
so that the unit hangs at your side.
N Operate the gun and always pay
attention to the optimal working
pressure while spraying.
N If the working pressure drops more
than 0.5 bar (7.25 PSI) , restore it by
operating the pump handle.
Filling the Container
To Next Page
Loading...
Need help?
General
Weight and Dimensions
