To Next Page
J
Jessica JohnsonSep 9, 2025
Why do 3 LEDs emit red light on Stihl SGA 85?
- JjamesjonesSep 10, 2025
If 3 LEDs emit a red light on your Stihl Paint Sprayer, it means the sprayer is too warm. Remove the battery and allow the sprayer to cool down.
Why do 3 LEDs emit red light on Stihl SGA 85?
If 3 LEDs emit a red light on your Stihl Paint Sprayer, it means the sprayer is too warm. Remove the battery and allow the sprayer to cool down.
What to do if Stihl SGA 85 pump cuts out during operation?
If your Stihl Paint Sprayer is cutting out during operation, it could be overheating. Remove the battery and allow the sprayer to cool down.
Why is the run-time so short on my Stihl Paint Sprayer?
If the run-time of your Stihl Paint Sprayer is too short, there are a couple of potential causes: * The battery may not be fully charged. In this case, charge the battery. * The battery's useful life may have been reached or exceeded. If this is the case, have the battery checked by an authorized STIHL servicing dealer.
What does it mean when 4 LEDs flash red on my Stihl SGA 85 Paint Sprayer?
If 4 LEDs flash red on your Stihl Paint Sprayer and beeps sound in quick succession for 15 seconds, it indicates a malfunction in the battery. To address this: * Remove the battery and reinsert it. * Switch on the sprayer. If the LEDs continue to flash, do not attempt to use the sprayer. The battery has a malfunction and needs replacement.
Why does the pump cut out during operation of my Stihl Paint Sprayer?
If the pump cuts out during operation of your Stihl Paint Sprayer, the battery may be too hot or too cold. To resolve this: * Remove the battery. * Allow the sprayer and battery to cool down gradually at ambient temperatures of about 50 °F to 68 °F (10 °C to 20 °C).
Why is the Stihl SGA 85 Paint Sprayer run time too short?
A short run time for your Stihl Paint Sprayer can be caused by a battery that is not fully charged or a battery that has exceeded its service life. Fully charge the battery. If the issue persists, consider replacing the battery.
What to do if Stihl Paint Sprayer doesn't pick up plant protection product?
If your Stihl Paint Sprayer isn't drawing up plant protection product, the pump may be stuck or the filter/spraying unit could be clogged. First, fill the container, insert the battery, and switch on the sprayer. Keep the spray gun switch lever pressed for about 1 minute. If it still doesn't work, stop using the sprayer and contact your STIHL dealer. Also, try cleaning the filter and spray attachment.
Why has the spray jet changed shape on my Stihl SGA 85?
A changed spray jet shape on your Stihl Paint Sprayer is typically due to a blocked or worn nozzle. Try cleaning the nozzle first. If that doesn't solve the problem, you may need to fit a new nozzle.
Why has the spray jet shape changed on my Stihl Paint Sprayer?
If the spray jet shape from your Stihl Paint Sprayer has changed, it's likely that the nozzle is either blocked or worn. Try cleaning the nozzle first. If cleaning doesn't restore the correct spray pattern, you may need to fit a new nozzle.
Why is my Stihl SGA 85 Paint Sprayer vibrating excessively?
If the spraying attachment vibrates and the pressure gauge is erratic on your Stihl Paint Sprayer, the pulsation damper on the pump may not be operating properly. To attempt to fix this: * Remove the battery. * Drain the container completely. * Insert the battery and switch on the sprayer. * Squeeze the trigger switch for 30 seconds. * Refill the container.
General| Product type | Backpack garden sprayer |
|---|---|
| Suitable for | Outdoor |
| Product color | Orange, White |
| Tank capacity | 17 L |
| Adjustable shoulder strap | Yes |
Weight and Dimensions| Width | 406 mm |
|---|---|
| Height | 606 mm |
| Weight | 6200 g |
Explains manual structure, main parts, and safety symbols.
Covers critical safety guidelines, intended use, operator, PPE, and chemical handling.
Details battery safety, charging setup, and status indicators.
Covers switching on/off, inserting/removing battery, and trigger operation.
Guides on assembling spray gun, lance, harness, and preparing for use.
Covers filling, emptying, adjusting pressure/nozzle, and operation tips.
Instructions for finishing work, transport, storage, and cleaning.
Outlines inspection schedules and common troubleshooting solutions.
Provides sprayer specifications, parts, disposal, and recycling information.
