Why is my Stihl Paint Sprayer not spraying correctly?
If your Stihl Paint Sprayer is not spraying chemicals or the shape of the spray has changed, it could be due to a blocked filter or nozzle. Clean the filter and nozzle. Alternatively, the nozzle may be worn, in which case, insert a new nozzle.
Why does the pump cut out during operation of my Stihl Paint Sprayer?
If the pump cuts out during operation of your Stihl Paint Sprayer, the battery may be too hot or too cold. To resolve this: * Remove the battery. * Allow the sprayer and battery to cool down gradually at ambient temperatures of about 50 °F to 68 °F (10 °C to 20 °C).
What does it mean when 4 LEDs flash red on my Stihl SGA 85 Paint Sprayer?
If 4 LEDs flash red on your Stihl Paint Sprayer and beeps sound in quick succession for 15 seconds, it indicates a malfunction in the battery. To address this: * Remove the battery and reinsert it. * Switch on the sprayer. If the LEDs continue to flash, do not attempt to use the sprayer. The battery has a malfunction and needs replacement.
Why is the run-time so short on my Stihl Paint Sprayer?
If the run-time of your Stihl Paint Sprayer is too short, there are a couple of potential causes: * The battery may not be fully charged. In this case, charge the battery. * The battery's useful life may have been reached or exceeded. If this is the case, have the battery checked by an authorized STIHL servicing dealer.
What to do if Stihl SGA 85 pump cuts out during operation?
If your Stihl Paint Sprayer is cutting out during operation, it could be overheating. Remove the battery and allow the sprayer to cool down.
General| Product type | Backpack garden sprayer |
|---|---|
| Suitable for | Outdoor |
| Product color | Orange, White |
| Tank capacity | 17 L |
| Adjustable shoulder strap | Yes |
Weight and Dimensions| Width | 406 mm |
|---|---|
| Height | 606 mm |
| Weight | 6200 g |
Explains manual structure, main parts, and safety symbols.
Covers critical safety guidelines, intended use, operator, PPE, and chemical handling.
Details battery safety, charging setup, and status indicators.
Covers switching on/off, inserting/removing battery, and trigger operation.
Guides on assembling spray gun, lance, harness, and preparing for use.
Covers filling, emptying, adjusting pressure/nozzle, and operation tips.
Instructions for finishing work, transport, storage, and cleaning.
Outlines inspection schedules and common troubleshooting solutions.
Provides sprayer specifications, parts, disposal, and recycling information.
To Next Page
