0458-600-8221-A
5
English
4 Safety Symbols on the Product
3.2 Spraying Attachment
1 Nozzle
For activating the spray.
2 Union Nut
For securing the nozzle to the spray lance.
3 Spray Lance
Carries the spray solution from the spray gun to the
nozzle.
4 Union Nut
For securing the spray lance to the spray gun.
5 Spray Gun
For controlling and directing the spray.
6 Pressure Gauge
Shows the sprayer’s operating pressure.
7 Control Handle
For holding and controlling the spraying attachment.
8 Union Nut
For securing the hose on the spray gun.
9 Trigger Switch
For opening and closing the valve in the spray gun.
Starts and stops the spray.
10 Retaining Latch
Locks/unlocks the trigger switch.
4.1 Sprayer
The following safety symbols are found on the sprayer:
5
6
8
9
2
1
10
3
4
7
0000-GXX-9932-A0
4 Safety Symbols on the Product
To reduce the risk of injury, follow the specified
safety precautions.
Read and follow all safety precautions in the
instruction manual. Improper use can lead to
serious or fatal personal injury or property
damage. In addition, read and follow the
warnings and instructions for the chemical
products being sprayed.
To reduce the risk of eye injury, always wear
goggles that are rated to ANSI Z87.1 to protect
against droplet/splash hazards. @ 5.4.
Exposure to toxic chemicals can cause serious
or fatal injury. The operator and bystanders may
need a properly fitted respirator approved by
NIOSH/MSHA for the chemical being used. Read
and follow all warnings and instructions on the
chemical product label.
Always wear rubber, chemical-resistant boots.
Wear protective coveralls as recommended in
the warnings and instructions for the chemical
being used. If you are spraying overhead, or if
the spray may reach head height, wear a
protective head covering.
To reduce the risk of contact with any chemicals,
always wear rubber, chemical-resistant gloves.
To Next Page
Loading...
