BG 56, BG 56 C, BG 66, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
English
15
Before fueling, clean the filler cap and
the area around it to ensure that no dirt
falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
Change the fuel pick up body every
year
Before storing your machine for a long
period, drain and clean the fuel tank and
run engine until carburetor is dry.
Starting the engine
N Observe safety precautions.
N Press the fuel pump bulb (1) at least
five times – even if the bulb is filled
with fuel.
Adjusting the setting lever
Only on BG 86, SH 86
N To start, move the setting lever to
the run position F
The setting lever selects and holds any
throttle position between idle and full
throttle.
Fueling
Warning!
In order to reduce the risk of burns or
other personal injury from escaping gas
vapor and fumes, remove the fuel filler
cap carefully so as to allow any pres-
sure build-up in the tank to release
slowly.
295BA064 KN
Warning!
After fueling, tighten fuel cap as
securely as possible by hand.
295BA065 KN
Starting / Stopping the
Engine
1
295BA066 KN
295BA069 KN
To Next Page
Loading...
