Stihl SR 340 - Replacing Starter Rope and Rewind Spring; Replacing the starter rope

30
English / USA
SR 340, SR 420
To reduce the risk of fire and burn
injury, use only spark plugs
authorized by STIHL. Always press
spark plug boot (2) snugly onto
spark plug terminal (1) of the proper
size. (Note: If terminal has
detachable SAE adapter nut, it must
be attached.)
A loose connection between spark
plug boot and ignition wire
connector in the boot may create
arcing that could ignite combustible
fumes and cause a fire.
Replacing the starter rope
: Remove the screws (1).
: Take the starter cover (2) off the
engine.
: Remove the spring clip (3).
: Remove the rope rotor with washer
(4) and pawl (5).
0
00BA036 TR
1
Replacing Starter Rope and
Rewind Spring
1
1
1
373BA025 KN
2
1
353BA034 KN
3
5
4