Setting down a load
DANGER
Risk of accident due to changed moment of tilt!
The load centre of gravity and the moment of tilt
move due to tilting the lift mast forwards with a raised
load or due to the load slipping. The truck may tip
forwards.
– Only tilt the lift mast forwards with a raised lifting
accessory when it is directly above the stack.
– When the lift mast is tilted forwards, take particu-
lar care to ensure that the truck does not tip for-
wards and that the load does not slip.
WARNING
Risk of accident from falling load!
If the fork or the load remains suspended during low-
ering, the load may fall.
– When removing from stock, move the truck far
enough back so that the load and the fork can be
lowered freely.
– Drive up to the stack with the load lowered
in accordance with regulations.
– Set the lift mast to vertical.
– Lift the load to the stacking height.
– Drive the truck towards the rack carefully.
Operating
4
Handling loads
24756378011526 EN - 03/2021 - 01
To Next Page
Loading...
