Maintenance 5
General maintenance information
At operating hours
1000 2000 4000 5000 7000
Carried out
8000 10000 11000 13000 14000
Check the load chains for damage and wear, and adjust and lubricate the load chains
Check the lift cylinder and connections for damage and leaks
Check the guide pulleys for damage and wear
Check the support rollers and chain rollers for damage and wear
Check the play between the fork carriage stop and the run-out barrier
Check the tilt cylinder and connections for damage and leaks
Check the fork carriage for damage and wear
Check the fork arm interlock for damage and correct function
Check the fork arms for wear and deformation
Check that there is a safety screw on the fork carriage or on the attachment
Special equipment
Check the heating system for damage, clean the air filter and replace as required;
observe the manufacturer's maintenance instructions
Check the attachments for wear and damage; observe the manufacturer's mainten-
ance instructions
Check the trailer coupling for wear and damage; observe the manufacturer'smai-
ntenance instructions
General
Read out error numbers and delete the list
Reset the maintenance interval
Check labelling to ensure it is complete
Perform a test drive
174
749 EN - 03/2017 309
To Next Page
Loading...
