Need help?Do you have a question about the Still RX70-16 and is the answer not in the manual?
Provides contact information for the manufacturer, STILL GmbH, including address, phone, fax, and email.
General introduction to the truck, its series, and basic features like diesel-electric drive.
Explains the meaning of CE labelling and its confirmation by the EC declaration of conformity.
Outlines the intended purpose of the truck and conditions for its use.
Specifies the truck is suitable for lifting, transporting, and stacking loads according to instructions.
Highlights liabilities for hazards caused by improper use and prohibits carrying passengers.
Explains the scope of documentation, including operating instructions and spare parts lists.
Defines the meaning of DANGER, WARNING, CAUTION, and NOTE symbols.
Defines roles like operating company, specialist, and driver, outlining responsibilities and qualifications.
Covers crucial aspects for safe use, including insurance, changes, and non-original parts.
Warns about structural changes affecting stability and requires manufacturer approval.
Stresses the importance of reporting defects and not deactivating safety systems.
Details factors affecting stability and rules for tyre selection and maintenance.
Discusses inherent risks that cannot be entirely excluded despite safety measures.
Explains factors affecting stability and actions to avoid loss of stability.
Presents a table evaluating hazards and corresponding measures for safe operation.
Details requirements for regular safety inspections, including time-based and incident-based checks.
Specifies mandatory annual checks by a specialist and creation of a test log.
Provides crucial safety guidelines for handling oils, hydraulic fluid, battery acid, and diesel fuel.
Details flammability and toxicity warnings for oils, with handling precautions.
Warns about pressurized hydraulic fluids being hazardous to health and the environment.
Illustrates the truck with numbered labels identifying key components like lift mast, overhead guard, and driver's compartment.
Details components within the driver's cabin, including controls, pedals, seat, and storage.
Explains the truck's display and operating unit, including buttons, indicators, and their functions.
Shows standard display elements like fuel level, drive program, operating hours, and time.
Lists the different types of operating devices available for controlling truck functions.
Describes the functions and operation of the double mini-lever control system.
Describes the functions and operation of the Joystick 4Plus control system for attachments.
Covers essential pre-operation checks, including visual inspections of various truck components.
Outlines critical visual checks to ensure the truck is safe and functional before use.
Gives safety instructions and warnings for safe entry and exit from the truck.
Explains how to adjust the driver's seat for safety and comfort, including suspension and lumbar support.
Emphasizes the importance of the seat belt for driver safety, especially in case of tipping.
Guides on starting the engine, including preheating, safety checks, and troubleshooting.
Outlines procedures for checking the foot brake and parking brake functionality.
Explains the Blue-Q efficiency mode, its functional description, and effects on auxiliary consumers.
Provides instructions on how to activate and deactivate the Blue-Q efficiency mode.
Covers essential safety regulations and practices for driving the truck.
Outlines rules for safe driving conduct, speed, and forbidden actions.
Details procedures for securely parking the truck and switching it off, including safety warnings.
Covers steps for safe parking and engine shutdown, including load lowering and brake application.
Explains the operation and safety aspects of the lifting system and its variants.
Describes the function that prevents lifting above a preset height to avoid damage.
Details the comfort feature for precise vertical positioning of the lift mast.
Covers safety regulations and procedures for safely handling and transporting loads.
Outlines critical safety rules for handling loads to prevent accidents.
Details how to determine load capacity and check rating plates before lifting.
Explains the function and procedure for measuring load weight.
Provides instructions for securely picking up loads, ensuring proper fork positioning.
Gives safety guidelines for transporting loads, emphasizing lowering the load and avoiding tilting.
Outlines procedures and safety warnings for safely setting down loads.
Covers the fitting, control, and safety aspects of various truck attachments.
Explains the procedures and requirements for fitting attachments, including CE certification.
Provides general guidance on controlling attachments based on different operating devices.
Covers the operation of various auxiliary equipment like lights, spotlights, and beacons.
Explains how to operate driving lights and working spotlights.
Details how to operate direction indicators using different control versions.
Covers operations related to the truck's cab, including doors, windows, lighting, and heating.
Provides instructions for opening the cab door from both the outside and inside.
Details the procedure for securely closing the cab door from outside and inside.
Covers all aspects of trailer operation, including coupling, uncoupling, and towing.
Highlights increased accident risks when using trailers and specifies speed limits.
Covers various messages that may appear on the truck's display, including error codes and general information.
Provides a comprehensive table of error codes, their meanings, and recommended actions.
Explains the "SERVICE BRAKE" message and required actions, including contacting the service centre.
Details the "APPLY HANDBRAKE!" message, its causes, and necessary steps to resolve.
Covers the "SAFETY BELT" message triggered by incorrect seat belt usage, affecting driving and hydraulics.
Details the "SEAT SWITCH" message triggered when the seat switch is not actuated, blocking functions.
Describes the "OVERHEATING" message indicating traction motor overheating and the need to cool down.
Provides essential safety guidelines for performing maintenance work on the truck.
Covers crucial safety warnings, especially regarding engine operation in enclosed spaces.
Details safety procedures and warnings related to lifting and jacking up the truck.
Outlines safety measures required when working on the lift mast or front of the truck.
Discusses personnel qualifications and information required for carrying out maintenance tasks.
Specifies requirements for personnel performing maintenance work, emphasizing qualifications and safety.
Describes how to interpret the "Service in" display and factors necessitating shorter maintenance intervals.
Stresses using only specified operating materials and proper handling to avoid damage.
Provides a visual guide to lubrication points on the truck and specifies lubricant types.
Contains detailed tables for lubrication, tyre, steering, brake, electrical, hydraulic, and lift mast maintenance.
Guides on accessing maintenance points, including opening and closing the bonnet and removing the bottom plate.
Details the procedure for safely opening the truck's bonnet, including seat and steering column adjustments.
Explains the process for removing and installing the bottom plate, with warnings about cable damage and crushing.
Outlines specific maintenance tasks required after the initial 50 operating hours, focusing on the break-in period.
Covers tasks to keep the truck in operational condition, including cleaning, topping up fluids, and filter changes.
Provides instructions for cleaning the radiator and checking for coolant leaks.
Details the procedure for changing the air filter insert, recommending replacement over cleaning.
Explains how to drain water from the fuel filter, emphasizing safety precautions for diesel fuel.
Describes the process of particle filter regeneration triggered by an on-display message.
Guides on lubricating various points on the truck, referring to the maintenance data table.
Details regular checks and replacement procedures for the seat belt to ensure safety.
Outlines monthly checks for seat belt wear, cleanliness, and buckle function.
Advises checking the driver's seat and its components for damage, especially after an accident.
Covers procedures for servicing wheels and tyres, including checks for wear, pressure, and fastenings.
Explains how to check and adjust the air pressure in all four tyres.
Provides instructions for battery maintenance, including checking charge status and charging procedures.
Explains how to check the battery charge status using the inspection window.
Details the procedure for replacing fuses, emphasizing the use of correct nominal current ratings.
Guides on checking the hydraulic oil level and safety precautions for handling hydraulic oils.
Outlines procedures for checking fork arms for deformation, wear, and proper latch operation.
Provides detailed dimensions of the truck, including lift mast, wheelbase, and fork dimensions.
Presents technical specifications for different truck models, including weights, dimensions, and performance data.
Discusses ergonomic considerations for the driver's compartment and head clearance.
Lists fuse codes, their amperage, and corresponding functions within the truck's electrical system.
To Next Page
General
