Operation 4
Driving
Driveways
Dimensions of roadways and aisle widths
The following dimensions and aisle width
requirements apply under the specified
conditions to ensure safe manoeuvring. In
each case, a check must be performed to
determine whether a larger aisle width is
necessary, e.g. in the case of deviating load
dimensions, attachments or lift masts.
Within the EU, Directive 89
/654/EEC (mini-
mum safety and health requi
rements for the
workplace) must be observe
d. The respective
national guidelines apply
for areas outside of
the EU.
The required aisle widths depend on the
dimensions of the load.
For pallets, these are:
Aisle width [mm]
Model
Type
With pallet
1000x1200
crosswise
With pallet
800x1200
lengthwise
7311
RX70-16
7314
3523 3727
7312
RX70-18
7315
3557 3762
7313
RX70-20
7316
3603 3810
The truck may only be
used on roadways
that do not have exces
sively sharp bends,
excessively steep grad
ients or excessively
narrow or low entrances.
174
749 EN - 03/2017 119