Still RX70-16 - Lubricating the Joints and Controls

Maintenance 5
Remaining ready for operation
8
9
0
6
7
4
3
5
7312_003-133_en_V3
A5795
Malfunctions during the regeneration process
are indicated by the message
EXH. GAS
PURIFIER
along with the corresponding
error code. The malfunctions must be rectified
by the authorised service centre.
– Notify the authorised servic
e centre.
Lubricating the joints and controls
– Oil or grease other bearing points and
joints according to the maintenance data
table; see ⇒ Chapter "Maintenance data
table", P. 5-314.
• Driver's seat guide
• Lubricate bonne
t hinges at the lubricating
nipple
• Control linkage for valves
• In the cab, lubricate door hinges at the
lubricating nipple (variant)
• Lubricate sha
fts and joints in dual-pedal
operation (va
riant)
174
749 EN - 03/2017 329