Operation 4
Testing and activities before dail
yuse
Adjusting the MSG 65/MSG 75
driver's seat
DANGER
There is a risk of accident if the seat or seat backrest
shifts suddenly, which could cause the driver to
move in an uncontrolled manner. This may result in
unintentional actuation of the steering or operating
devices and thus cause the truck or load to move in
an uncontrolled fashion.
– Do not adjust the seat or seat backrest while
driving
– Adjust the seat and the seat backrest so that all
operating devices can be actuated safely
– Ensure that the seat and seat backrest are
securely engaged
WARNING
On some equipment variants, the
amount of head clearance on the truck
may be restricted.
On these specific equipment variants,
the distance between the head and
the lower edge of the roofing sheet
must be at least 40 mm.
NOTE
If there are separate operating instructions for
the seat, they must be followed.
WARNING
To obtain
optimum seat cushioning, you must ad-
just the
seat suspension to your own body weight.
This is b
etter for your back and protects your health.
–Topreven
t injury, make sure that there are no
objects w
ithin the swivel area of the seat
174
749 EN - 03/2017 75
To Next Page
