2
Warning
Device should remain powered on
at all times.
For optimal performance and
reliability, use a surge protected
power bar between the SB3 unit
and the electrical outlet.
To reduce the risk of re or electric
shock, do not expose this unit to rain
or other forms of moisture.
To prevent electric shock, do not
connect the polarized plug of
the external power supply to an
extension cord, receptacle, or other
outlet unless the blades can be fully
inserted.
To reduce the risk of SB3
malfunction, never place the unit
on top of electronic equipment or
a surface that may generate heat
(e.g. amps, routers, computers, etc.).
•
The SB3 should be installed
horizontally and right side up.
Other orientations may cause
problems with air flow and
shorten the lifespan of the
components.
•
The SB3 should be placed in a
clean, well-ventilated area. Do
not stack items on top of or
against it.
Safety Instructions
•
Use the power supply unit
provided in the box. Using
another power supply, will void
the warranty.
•
Ensure all cabling is routed
properly and safely.
•
Ensure your SB3 is plugged into
a properly grounded, always-on
AC electrical outlet.
Caution
Do not unscrew, open,
or manipulate your
SB3 device’s internal
components.
Risk of explosion if internal
battery is replaced by an
incorrect type.
To Next Page
Loading...
