Stirling GS511 - Getting Started; Step 1: Assemble Telescopic Poles; Step 2: Attach Clothes Hanger

AFTER SALES SUPPORT
MODEL: GS511 PRODUCT CODE: 53559 07/20161300 554 124 info@gstrading.com.au
AUS
11
Getting Started
Before using for the first time
Carefully remove all of the contents from the packaging and ensure
that all parts have been received. Ensure to read all instructions
carefully and keep them for future use.
STEP 1
Insert the dual telescopic poles
(6) into the slots on the body of
the garment steamer and lock
them into place (following the
arrows shown below)(Fig.1).
Turn the tabs located on the
base of the unit to lock the
poles into place (Fig.2).
STEP 2
To attach the clothes hanger (3)
open the top clip on each of the
telescopic poles (6). Align the tabs
of the clothes hanger (3) and push
down (Fig.3). Close the top clip on
both of the telescopic poles (6) to
lock into place.
If required, pull the garment sleeve
(5) over the dual telescopic poles
(6) before the clothes hanger (3) is
attached.
Fig.1
Fig.2 Fig.3