AFTER SALES SUPPORT
MODEL: GS511 PRODUCT CODE: 53559 07/20161300 554 124 info@gstrading.com.au
AUS
14
Instructions
Once the water tank (9) is filled, follow the below steaming instructions
1. Connect the power cord to a power outlet. Once the power outlet
is turned on a beeping sound will be heard. The garment steamer
will take 40 seconds to heat up.
2. Press the power/steam setting button (12). This can be done with
your foot lightly pressing on button to save you bending down
(Fig.14). Allow the garment steamer to heat up until steam is visible.
There will be 60 minutes of continuous steam.
• After making sure the exterior of water tank (9) is dry, return the
water tank (9) to the base of the garment steamer, ensuring that it is
sitting correctly and securely in the base.
• The water level indicator (8) will be green to show that there is
enough water in the water tank (9)(Fig.12). When the water level
indicator (8) is red, the water tank (9) will need to be filled with more
water (Fig.13).
NOTE: Only fill the water tank (9) with cold water, DO NOT use hot
water. DO NOT add perfumes, vinegar, starch, descaling agents or
any other chemicals to avoid damage to your steamer as this may
damage the unit.
Fig.12: Water tank is full Fig.13: Water tank is empty
Fig.14
To Next Page
Loading...
