Fig.24
Accessories
Fabric Brush Attachment
Before using an accessory, check the garment manufacturer
recommendations to ensure that the attachment is safe to be used.
It is also recommended that you carry out a test on part of the fabric which
cannot be seen. Place the accessories over the ceramic coated steam
plate of the steamer head (1).
Use the fabric brush attachment (15) for
heavily creased garments. Steam as usual,
using the fabric brush attachment (15) to
smooth any stubborn wrinkles.
Fig.21
Pleat Attachment
Use the pleat attachment (16) to create
pleats and creases in your garments.
Simply hold down the handle and place
the fabric between the steam head (1)
and the pleat attachment (16) and move
the steam head (1) in a vertical motion
to press in the pleat (Fig.22).
Lint Brush Attachment
Use the lint brush attachment (14) to
remove lint, hair, and animal fur for a
professional finish (Fig.23).
Steam Glove Attachment
The purpose of the steam glove (17) is
to protect your hand against hot steam
from the steam head (1), especially when
steaming the ends of your garments.
You can use this glove when stretching
out sleeves of shirts or other garments.
Fig.22
Fig.22
AFTER SALES SUPPORT
MODEL: GS511 PRODUCT CODE: 53559 07/20161300 554 124 info@gstrading.com.au
AUS
17
To Next Page
Loading...
