Care and Cleaning
Cleaning and Care
To prolong the service life of the washing machine, keep it in good condition and perform regular
maintenance. For any type of cleaning and maintenance, make sure the washing machine is disconnected
from the mains power supply.
Cleaning the Washing Machine (when required)
• Use a soft cloth to wipe any water or dirt off the washer lid and housing. If using a damp cloth, squeeze it
almost dry to avoid leaving water residues.
• The detergent box may be pulled out for cleaning, if required. Other inside parts should be wiped with a
damp cloth, if necessary.
• Do not use any chemical, alkaline or abrasive cleaning agents to avoid damaging the surface. Do not spray
water directly onto the washer housing.
Cleaning the lint filter (suggested interval: every week)
Take out the lint lter as illustrated below. Open the lter and rinse it clean under running water, taking care
not the damage any parts. Reinstall the lter, making sure it ts securely behind the cover clasp and latches
and locks securely into place.
Cleaning the water inlet valve (suggested interval: every 6 months)
To avoid blockage of the mesh lter at the water inlet after long time
use, detach the water inlet hose, making sure you have turned off the
water supply at the taps beforehand. Take the mesh lter out of the
water inlet valve and clean the lter with a soft brush. Then assemble
the mesh lter back into the valve and reconnect the water inlet hose.
Cleaning the hose filter (suggested interval: every 6 months)
To avoid blockage of the hose lter after long time use, detach the water inlet hose, making sure you have
turned off the water supply at the taps beforehand. Turn the nut anticlockwise to take off the hose, clean the
lter under running water or with a soft brush, then reconnect the hose.
To Next Page
Loading...
