25
AUS
AFTER SALES SUPPORT
MODEL: STR-E15BGD PRODUCT CODE: 708548 10/2022
1300 112 534
tempo.org/support
Adjusting the preset temperature
The espresso machine is preset to provide espresso at 70°C. If you want to adjust
this preset temperature, please proceed as follows:
1. Press the POWER button to switch off the machine. Once it is off,
simultaneously press the MENU and SHOT buttons for at least two seconds.
The machine will then enter temperature adjustment mode.
2. Press the MENU button repeatedly to cycle through the temperature options -
low (65°C), medium (70°C), and high (75°C).
3. Press the POWER button to switch on the machine. It will have memorised the
new temperature for future use.
Adjusting the hot water output
The espresso machine is preset to provide hot water for 60 seconds. This flow can
be stopped at any time by pressing the START/STOP button. Alternatively, if you
want to adjust this preset value, please proceed as follows:
1. Repeatedly press the MENU button until the hot water icon shows on the
screen.
2. Rotate the START/STOP knob to adjust the hot water time.
3. Press the START/STOP button to start the flow of water. It will automatically
stop when the timer reaches 0.
Restoring the machine to factory settings:
1. Press the POWER button to switch off the machine.
2. Press the SHOT and CUPS buttons simultaneously for at least two seconds to
enter factory reset mode.
3. The POWER button light will illuminate and all other button lights will start to
flash (for MENU, DESCALE, SHOT, CUPS, START/STOP).
4. Press the START/STOP button to finalise the factory setting. All button lights
will switch off.
5. Press POWER button again to power on. The machine will revert to first time
use status, with the MENU, DESCALE, SHOT, CUP and START/STOP buttons
flashing, and POWER button illuminated. This indicates that the machine has
been restored to factory settings successfully.
Instructions (Cont.)
To Next Page
Loading...
