Switching On/Off
Make sure the rangehood is properly connected to the power supply and the
power is switched on at the outlet.
After the rangehood has been properly installed, insert the power plug into
an appropriate electrical outlet and let the unit run for a few minutes prior to
using it while cooking.
This switch turns the rangehood lights either on or off.
I Turns the rangehood lights ON.
O Turns the rangehood lights OFF.
This button switches the rangehood on and toggles between the fan
speed settings: HIGH, LOW, OFF.
= Turns on the fan motors to HIGH speed for maximum
extraction.
O Turns off the fan motors for no extraction; the rangehood is
switched OFF.
– Turns on the fan motors to LOW speed for minimum extraction.
NOTE:
• The rangehood will only operate once the slide-out rail is pulled outwards
towards the kitchen.
• Close the front panel and the rangehood will stop working.
• The next time the front panel is pulled back out, the rangehood will start
working at the previously set level.
Instructions
To Next Page
Loading...
