Description Part Quantity
Rangehood 1
40mm Front fascia
rail (80mm rail already
installed)
2 (total)
Charcoal lters
(already installed)
1 set (2 pcs)
Screws
(M4x30mm)
4
Flat washers 4
Front vent cover
(if external ducting is
selected)
1
Flue outlet adaptor 1
NOTE: The illustration of parts shown above is not to scale; it is for reference
purposes only.
Installation Kit
The installation kit contains the following parts:
Installation
Unpacking
• This product has been packaged to protect it against transportation
damage. Unpack the appliance and remove all packaging materials from
around the rangehood. Keep all packaging materials in a safe place. It will
help prevent any damage if the product needs to be transported in the
future, and you can use it to store the appliance. Whenever possible, reuse
the carton and recycle it when disposing of the packaging materials.
• Plastic wrapping can be a suffocation hazard for babies and young
children, so ensure all packaging materials are out of their reach, and
dispose of them safely.
To Next Page
Loading...
