9
Fig. 4
Fig. 5
Fig. 6
Fig. 3
Attaching the floor brush
• Fit the dual use floor brush tightly onto the
end of the extension tube (Fig. 3).
Your vacuum cleaner is now ready for use.
The accessories
Besides the floor brush you just attached,
you may extend the functions of your vacuum
cleaner with the other attachments supplied.
WARNING: Always ensure that the vacuum
cleaner is disconnected from the power
supply before changing accessories.
• The turbo brush (Fig. 4) is suitable for
thorough cleaning of carpeted areas. It
contains a brush that rotates at high speed,
which increases the noise level during use.
• The crevice tool (Fig. 4) is designed for
cleaning in hard to reach places, such as in
between furniture.
• The brush tool (Fig. 4) is suitable for
dusting furniture.
• The crevice tool and brush tool can be
stored in the accessory compartment when
not in use (Fig. 5).
• To open the compartment, push down the
latch labelled "PUSH" on top of the vacuum
cleaner body (Fig. 6).
• To attach an accessory tool, make sure the
vacuum cleaner is unplugged. Push the tool
firmly onto the bottom end of the telescopic
tube, or directly onto the handle.
Getting Started (Cont.)
Turbo brush
Crevice tool
Brush tool
ATTENTION!
Using the vacuum cleaner without a
nozzle attached increases the danger of
accidentally sucking in objects.
To Next Page
Loading...
