FP-CLD-WATSON1
Software Overview
7
FP-CLD-WATSON1 Software Description
FP-CLD-WATSON1 is an STM32Cube function pack. It can
connect an IoT node based on the STM32L4 Discovery kit IoT
node (B-L475E-IOT01A) or theNUCLEOF429ZI to IBM Watson
IoT, transmit sensor data and receive commands from remote
applications. This package lets you jump-start end-to-end IoT
development so that you can focus on adding desired functions..
Key features
• Complete middleware to build applications based on Wi-
Fi/Ethernet connectivity, inertial and environmental sensors, and
to connect an STM32 Nucleo-144 development board with
STM32F429ZI MCU, or an STM32L4 Discovery kit IoT node (B-
L475E-IOT01A) to IBM Watson IoT Cloud.
• Provide software interface to access temperature and humidity
sensor (HTS221), pressure sensor (LPS25HB), motion sensors
(LIS3MDL, LSM303AGR, LSM6DS0, LSM6DSL) and to write
and read the RFID/NFC tag (ST25DV04K)
• Integrated mbedTLS and MQTT protocol middleware
• Integrated Fast Fourier Transform (FFT) algorithm for vibration
analysis
• Sample implementation based on Wi-Fi connectivity available
for STM32L4 Discovery kit IoT node (B-L475E-IOT01A), based
on Ethernet connectivity available for X-NUCLEO-IKS01A2, and
X-NUCLEO-NFC04A1, when both connected to a NUCLEO-
F429ZI
• Easy access to IBM Watson IoT Cloud services for sensors
data visualization and processing.
Overall Software Architecture
FP-CLD-WATSON1
Latest SW available at www.st.com
To Next Page
Loading...
Need help?
General
