Do you have a question about the STMicroelectronics STM32H7 and is the answer not in the manual?
Series | STM32H7 |
---|---|
Flash Memory | Up to 2 MB |
RAM | Up to 1 MB |
Operating Voltage | 1.62 V to 3.6 V |
ADC | Up to 3x 16-bit ADCs |
DAC | Up to 2x 12-bit DACs |
Timers | Up to 22 timers |
Communication Interfaces | USB, Ethernet, CAN, SPI, I2C, UART, SDIO |
Operating Temperature | -40°C to 85°C/125°C |
Package | LQFP, WLCSP |
Core | ARM Cortex-M7 |
Max CPU Frequency | 480 MHz |
Explains the meaning of the order code format for Nucleo-144 boards.
Specifies the OS and hardware needed for development.
Lists the required software development tools for STM32H7.
Describes the preloaded software for easy demonstration of board peripherals.
Step-by-step guide to configure the Nucleo-144 board and launch the demo application.
Identifies key components and connectors on the top view of the Nucleo-144 board.
Provides physical dimensions and layout of the Nucleo-144 board in millimeters and mils.
Details the integrated STLINK-V3E debugger/programmer features and setup.
Explains the different sources available to power the Nucleo-144 board.
Describes configuration options for external high-speed and low-speed clocks.
Details functionality of LEDs, push-buttons, voltage selection, and communication ports.
Explains configuration of solder bridges and jumpers for board settings.
Pinout and function of the USB connector for STLINK-V3E connection.
Pinout for USB OTG full-speed communication link.
Pinout and function of the Ethernet connector for network connectivity.
Pin assignments and ARDUINO® Uno V3 compatibility for ST Zio connectors.
Pin assignments for ST morpho connectors, allowing extension board connection.
Information on product identification labels and markings on the PCB.
Details historical product changes, revisions, and limitations for the boards.
Tracks changes and updates made to different board revisions over time.
Regulatory statement regarding compliance with FCC rules for digital devices.
Regulatory statement regarding compliance with ISED Canada rules for digital devices.