STMicroelectronics STM32H7 - Product History

Nucleo-144 boards (MB1364) information UM2407
44/49 UM2407 Rev 3
9.2 Nucleo-144 boards (MB1364) product history
Table 23. Product history
Order
code
Product
identification
Product details
Product change
description
Product limitations
NUCLEO-H743ZI2
NUH743ZI$AT1
MCU:
– STM32H743ZIT6
revision ‘V’
Initial revision
The IDD measurement of
the STM32H7x3 MCU
cannot be performed in
Standby mode because of
ETH PHY (U15) and the
pull-up resistors (R40,
R43, R46, R47, and R48)
supplied by VDD_MCU.
MCU errata sheet:
– STM32H742xI/G and
STM32H743xI/G device
limitations (ES0392)
Board:
– MB1364-H743ZI-C01
NUH743ZI$AT2
MCU:
– STM32H743ZIT6
revision ‘V’
The IDD measurement of
the STM32H7x3 MCU can
be measured in Standby
mode. The ETH PHY is
powered by VDD and is
separated from
VDD_MCU.
The silkscreen is
corrected on the morpho
connectors.
No limitation
MCU errata sheet:
– STM32H742xI/G and
STM32H743xI/G device
limitations (ES0392)
Board:
– MB1364-H743ZI-E01
NUCLEO-H753ZI
NUH753ZI$AT1
MCU:
– STM32H753ZIT6
revision ‘V’
Initial revision
The IDD measurement of
the STM32H7x3 MCU
cannot be performed in
Standby mode because of
ETH PHY (U15) and the
pull-up resistors (R40,
R43, R46, R47, and R48)
supplied by VDD_MCU.
MCU errata sheet:
– STM32H750xB and
STM32H753xI device
limitations (ES0396)
Board:
– MB1364-H753ZI-C01
NUH753ZI$AT2
MCU:
– STM32H753ZIT6
revision ‘V’
The IDD measurement of
the STM32H7x3 MCU can
be measured in Standby
mode. The ETH PHY is
powered by VDD and is
separated from
VDD_MCU.
The silkscreen is
corrected on the morpho
connectors.
No limitation
MCU errata sheet:
– STM32H750xB and
STM32H753xI device
limitations (ES0396)
Board:
– MB1364-H753ZI-E01