STMicroelectronics STM32H7 User Manual

UM2407 Rev 3 45/49
UM2407 Nucleo-144 boards (MB1364) information
48
9.3 Board revision history
NUCLEO-H723ZG
NUH723ZG$AT1
MCU:
– STM32H723ZGT6
revision ‘Z’
Initial revision No limitation
MCU errata sheet:
– STM32H72xx/73xx
device errata (ES0491)
Board:
– MB1364-H723ZG-E01
Table 23. Product history (continued)
Order
code
Product
identification
Product details
Product change
description
Product limitations
Table 24. Board revision history
Board reference
Board variant and
revision
Board change
description
Board limitations
MB1364
MB1364-H743ZI-C01
MB1364-H753ZI-C01
Initial revision
The IDD measurement of
the STM32H7x3 MCU
cannot be performed in
Standby mode because of
ETH PHY (U15) and the
pull-up resistors (R40,
R43, R46, R47, and R48)
supplied by VDD_MCU.
MB1364-H743ZI-E01
MB1364-H753ZI-E01
MB1364-H723ZG-E01
The IDD measurement of
the STM32H7x3 MCU can
be measured in Standby
mode. The ETH PHY is
powered by VDD and is
separated from
VDD_MCU.
The silkscreen has been
corrected on the morpho
connectors.
No limitation

STMicroelectronics STM32H7 Specifications

General

Brand	STMicroelectronics
Model	STM32H7
Category	Microcontrollers
Language	English