Do you have a question about the STMicroelectronics STM32F469I-DISCO and is the answer not in the manual?
Microcontroller Series | STM32F4 |
---|---|
Core | ARM Cortex-M4 |
Core Speed | 180 MHz |
Flash Memory | 2 MB |
ADC Resolution | 12-bit |
DAC Resolution | 12-bit |
Display Interface | LTDC |
SAI audio codec | Yes |
On-board Debugger | ST-LINK/V2-1 |
Microcontroller | STM32F469NI |
SRAM | 384 KB |
Operating Voltage | 1.7 V to 3.6 V |
Timers | 17 |
Communication Interfaces | I2C, SPI, USART, USB |
Ethernet | 10/100 Mbps |
Sensors | MEMS accelerometer |
Operating Temperature | -40 °C to +85 °C |
Details on product identification markings.
Explanation of product code structure.
Specifies required operating systems and cables.
Lists supported software development tools.
Information on preloaded demo software.
Details on the integrated debugger/programmer.
How to power the development board.
Information on the board's clock sources.
Explains the different reset triggers.
Describes the audio output capabilities.
Details on the onboard microphones.
Information on the USB On-The-Go Full Speed interface.
How to use the microSD card slot.
Details on the Synchronous Dynamic Random-Access Memory.
Information on the Quad SPI Flash memory.
Details on the virtual serial port functionality.
Describes the ARDUINO® compatible expansion connectors.
Details on the CN12 extension header.
Information about the Display Serial Interface LCD.
Explains the function of buttons and LEDs.
Details on the I2C extension connector.
Information on the USB OTG FS connector.
Details on the microSD card connector.
Information about the ST-LINK USB connector.
Details on the audio output jack.
Statement regarding FCC compliance rules.
Statement regarding Industry Canada compliance rules.
Warning about potential radio interference.