UM1932 Rev 3 7/30
UM1932 Ordering information
29
2 Ordering information
To order the 32F469IDISCOVERY Discovery kit, refer to Table 1. Additional information is
available from the datasheet and reference manual of the target microcontroller.
2.1 Product marking
Evaluation tools marked as "ES" or "E" are not yet qualified and therefore they are not ready
to be used as reference design or in production. Any consequences deriving from such
usage will not be at ST charge. In no event, ST will be liable for any customer usage of
these engineering sample tools as reference design or in production.
"E" or "ES" marking examples of location:
• On the targeted STM32 that is soldered on the board (for illustration of STM32 marking,
refer to the section “Package information” of the STM32 datasheet available at
www.st.com).
• Next to the evaluation tool ordering part number, that is stuck or silk-screen printed on
the board.
This board features a specific STM32 device version, which allows the operation of any
bundled commercial stack/library available. This STM32 device shows a "U" marking option
at the end of the standard part number and is not available for sales.
In order to use the same commercial stack in his application, a developer may need to
purchase a part number specific to this stack/library. The price of those part numbers
includes the stack/library royalties.
2.2 Codification
The meaning of the codification is explained in Table 2.
The order code is mentioned on a sticker placed on the top or bottom side of the board.
Table 1. List of available products
Order code Board reference Target STM32
STM32F469I-DISCO MB1189 STM32F469NIH6U
Table 2. Codification explanation
STM32F4XXY-DISCO Description Example: STM32F469I-DISCO
STM32F4
MCU series in STM32 32-bit Arm Cortex
MCUs
STM32F4 Series
XX MCU product line in the series STM32F469
Y
STM32 Flash memory size:
– I for 2 Mbytes
2 Mbytes
DISCO Discovery kit Discovery kit
To Next Page
Loading...
Need help?
General
