STMicroelectronics STM32 Series - Setup and Prerequisites; Hardware Prerequisites for Setup

Setup & Demo Examples
HW prerequisites (1/2)
9
• 1x Motion MEMS and environmental sensor expansion board for STM32 Nucleo (X-NUCLEO-
IKS01A2)
• Note: the vibration analysis application is available only when using the X-NUCLEO-
IKS01A2 board
• 1x Dynamic NFC tag expansion board expansion board for STM32 Nucleo (X-NUCLEO-
NFC04A1) (optional)
• 1x STM32 Nucleo development board (NUCLEO-F429ZI)
• NFC-enabled Android™ device (optional)
• Windows 7 or higher - Laptop/PC
• Ethernet port for connectivity supporting DHCP
• 1 x micro USB cable
X-NUCLEO-NFC04A1
(optional)
NUCLEO-F429ZI
Micro USB Cable
X-NUCLEO-IKS01A2