Stoneridge SE5000 Quick Guide

SE5000 Rev.7.3, 102024P/01R02 EN
3
1
2
3
2
1
2
Note! Card handling and browse in menu is only possible when vehicle is not moving.
STONERIDGE - SETTING THE STANDARD
For full details on the SE5000 funconality we refer to the
Driver & Company Manual or visit www.SE5000.com
Company Quickguide
SE5000 Digital Tachograph
Overview
Insert the card
(always possible in standard menu and ignion ON)
1. Press and hold the driver or co-driver buon unl tray opens.
2. Insert the card with the chip facing upward.
3. Close the tray by pushing it gently forward.
Withdraw the card (not possible in all menus)
1. Press and hold the driver or co-driver buon unl tray opens.
2. Press the card up slightly from underneath through the opening in the tray
or push the edge of the tray down unl the card pops out.
Driver
buon
Co-driver
card tray
Paper
cassee
Driver
card tray
Co-driver
buon
E
Cancel, move back to previous display
TR
Select, highlight, change values
y
Conrm, move forward in displays
Default Acvity key on/o
This seng gives the opportunity to preset an automac acvity change for
both driver and co-driver when switching the ignion key on or o (consult
relevant authority for naonal regulaons).
1. Press the conrm buon.
Select and conrm Sengs.
2. Select and conrm Parameters.
3. Select and conrm Default acv.key on or
Default acv.key o.
4. Select and conrm the preferred acvity; No
change, Rest, Available or Work.
5. The following is displayed.
6. Press the cancel buon three mes to re-
turn to the standard display.
Daylight Saving Time
An automac local me adjustment for summer and winter is automacally
prompted on the last Sunday in March and last Sunday in October, respecvely.
1. Select YES to acknowledge or NO to cancel
the me change.
03:01
Default activ.
key on
Default activ.
key off
Changes
saved
New time?
Parameters
SETTINGS
YES
Ready to
drive

Stoneridge SE5000 Specifications

General

Category	Digital Tachograph
Display	LCD
Power Supply	Vehicle battery
Operating Temperature	-25°C to +70°C
Memory	Internal memory
Interfaces	USB
Operating Voltage	12-24 V DC
Recording Medium	Driver card