ST129-JA1TA.10
Temperature controller
Order number 900321.003
Wiring diagram
Product description
The controller ST129-JA1TA.10 is intended for the assembly on DIN rail, which allows easy in-
stallation in the switch gear cabinet. It was specifically developed for direct switching at high per-
formances. Given the high maximum electric load of 16A (ohm) and 6A (inductive) it can operate
without cut-out relay in many cases. The controller is supplied with 230V AC and has 4 keys.
Sensor: Pt100, PTC
Range: dependent on the type of sensor
Housing size(L x W x H): 106 x 95 x 60mm
Installation: Clip-on mounting on DIN-Rail 35 x 7.5mm
Connector: screw terminal
1
To Next Page
Need help?
General
