Strasbaugh Operator Functions
Version 4.0 - February 1998 3 - 15
Idle State with "Screen Saver": If the machine is left idle (not busy doing
anything and no keys or buttons pressed), it will go to an idle state after a
predetermined idle delay. The predetermined idle delay is selectable from 1
minute on up as calibration variable 185.
The idle state turns off the existing display screen and replaces it with a
small activity indicator display, leaving most of the screen blank a majority
of the time. Also, the elevator rinse water may turned off.
Pressing any key, the START button, the HALT button, or
loading/unloading cassettes will restore the display screen and turn the
elevator rinse water back on.
Note: The screen saver functions in all menus except Homing, Manual
Control, and Diagnostics.
To Next Page
Loading...
