Strasbaugh 6DS-SP - Page 13

Strasbaugh Table of Contents
Version 4.0 - February 1998 xi
Menu Information Locator
The table below lists the 6DS-SP 4.25 software menus alphabetically
together with the location(s) in the Operations and Maintenance manuals at
which detailed information on each may be found.
Menu Where to Find Details - Manual
Location(s)
Alarm (Error) Log Menu Operations:
v Ch. 5-Troubleshooting
Maintenance:
v Ch. 13-Troubleshooting
Alarm Parameters Menu Operations:
v Ch. 4-Machine Setup
Auto Polish Cycle Menu Operations:
v Ch. 3-Operator Functions
Auto Polish Parameters Menu Operations:
v Ch. 4-Machine Setup
Calibration/Configuration Menu Maintenance:
v Ch. 10-Software Calibration
v Appendix A-Calibration Variables
Conditioning/Cleaning Parameters Menu Operations:
v Ch. 4-Machine Setup
Diagnostics Menu Maintenance:
v Ch. 10-Software Calibration
GEM/SECS Configuration Maintenance:
v Appendix A-User Interface Reference
v 6DS-SP GEM Documentation
Homing Menu Operations:
v Ch. 3-Operator Functions
Machine Parameters Menu Operations:
v Ch. 4-Machine Setup
Machine Setup Menu Operations:
v Ch. 4-Machine Setup
Manual Control Menu Maintenance:
v Ch. 10-Software Calibration