Operations Model 6DS-SP Planarizer
3 - 24 Version 4.0 - February 1998
MENUS USED IN BASIC OPERATION
WARNING: DO NOT OPERATE A 6DS-SP WITH AN
UNLOADED CARRIER IN THE MACHINE!
A carrier which is loaded on a spindle may not clear
an unloaded carrier sitting on a load or cleaning
station.
During bridge and shuttle moves, loaded carriers can
collide with unloaded carriers, causing machine
damage.
Therefore, always remove loose carriers from the
machine before taking any action that will cause
machine motions.
The section below provides details on selection available at the menus used
in basic machine operation.
For step-by-step procedures for using the menus, refer to the Basic
Operation section of this chapter.
To Next Page
Loading...
