Strasbaugh Operator Functions
Version 4.0 - February 1998 3 - 47
4 - RETRIEVE A STORED RECIPE
As instructed by your supervisor or the process engineer,
retrieve a stored recipe by following the steps shown below:
Note: To set or confirm recipe parameters, follow the procedures found in
the Machine Setup chapter of this manual.
Operator Action Explanation/Screen Display
1. <F9> Press the F9 key to choose
“Select Menu”.
2. <F3> Display the Recipe Management
Menu by pressing the F3 key to
select “Recipe Manage”.
3. <F2> At the Recipe Management
Menu, highlight the desired
recipe by pressing the F2 key
until the highlight bar moves
down to the recipe name.
4. <F3> Press the F3 key to select “Get
Recipe”.
The control program retrieves the
highlighted recipe and displays
its name in the Rec area of the
screen.
To Next Page
Loading...
