Strasbaugh Operator Functions
Version 4.0 - February 1998 3 - 59
To flush both slurry lines at once, select Both:
Operator Action Explanation/Screen Display
2. <F2> At the Slurry Flush Menu, press
the F2 key until the highlight bar
moves to the “Slurry System”
line.
3. <F3> Press the F3 key (“View the
Choice” until “Both” is
displayed.
Notes:
To select Slurry 1, press the F3 key until “Slurry 1” is
displayed.
To select Slurry 2, press the F3 key until “Slurry 2” is
displayed.
4. <F4> Press the F4 key to select “Enter
Choice”.
Select the flow rate and flush time:
Operator Action Explanation/Screen Display
5. <F2> At the Slurry Flush Menu, press
the F2 key until the highlight bar
moves to the “Flow Rate” line.
6. 250 Enter the desired number of
milliliters per minute (for
example, “250”).
To correct, press the Escape or
Backspace key.
To Next Page
Loading...
