Operations Model 6DS-SP Planarizer
3 - 60 Version 4.0 - February 1998
7. <F4> When the desired number is
displayed on the Flow Rate line,
press the F4 key to select “Enter
Choice”.
8. <F2> Press the F2 key until the
highlight bar moves to the “Flush
Time” line.
9. 30 Enter the desired number of
seconds (for example, “30”).
To correct, press the Escape or
Backspace key.
10. <F4> When the desired number is
displayed on the Flush Time line,
press the F4 key to select “Enter
Choice”.
Start the cycle:
Operator Action Explanation/Screen Display
11. <START> On the control panel, press the
black <START> button.
When the slurry flush is completed, Time Remaining will
have returned to 0.
To Next Page
Loading...
