Operations Model 6DS-SP Planarizer
3 - 62 Version 4.0 - February 1998
Select the carrier unload function:
Operator Action Explanation/Screen Display
4. <F8> At the Auto Polish Cycle menu,
press the F8 key to select
“OTHER”, displaying the
alternate function key list.
5. <F2> Press the F2 key to select
“Unload Carriers”.
6. Wait. Wait for bridge and spindles to
finish moving.
Carriers will remain on cleaning stations as spindles rise.
The shuttle will then move forward to a position within
reach of the operator.
7. Open door. Open Left Side Operator Door.
8. Remove carriers. Remove carriers by hand.
9. Close all doors to the machine.
To Next Page
Loading...
