Strasbaugh Operator Functions
Version 4.0 - February 1998 3 - 71
4 - RUN A PAD CONDITIONING CYCLE AT THE AUTO POLISH
MENU
Select the Auto Polish Cycle Menu and choose Condition Pad:
Operator Action Explanation/Screen Display
1. <F9> Press the F9 key to choose
“Select Menu”.
2. <F1> Display the Auto Polish Cycle
Menu by pressing the F1 key to
select “Auto Cycle”.
3. <F3> To start the cycle, press the F3
key to select “Condition Pad”.
4. Wait. Wait for the cycle to finish.
To Next Page
Loading...
