Strasbaugh Machine Setup
Version 4.0 - February 1998 4 - 35
MACHINE PARAMETERS MENU
(SCREEN PAGE 2)
This menu/page permits setting some of the seldom changed parameters for
machine operation. These parameters can affect process and are therefore
saved as part of the recipe. (Other machine settings can be found in the
Machine Parameters and Calibration/Configuration menus.)
Carrier pad rinse time also applies to the rinses that spray the tops and sides
of the carriers. Single table machines don't have carrier pad rinses but do
have top/side rinses. Therefore, for a single table machine this parameter
should be set for the desired carrier top/side rinse.
Rinse type selection is only applicable if the machine has the chemical
option. Without this option, all rinse types should be set to DI Water.
If the curtain rinse option is not installed, its rinse type parameter can be
ignored.
To Next Page
Loading...
