Operations Model 6DS-SP Planarizer
4 - 52 Version 4.0 - February 1998
Function Key Choices Available at the Password Menu
Key Label Function(s)
Set to
'Oper'
"Set to Operator Level" causes the password level to be set to
the most restrictive level. This does not require a password.
When selected, the level will immediately change to
Operator.
Set to
'Engr'
"Set to Engineer Level" will cause a prompt for an
engineering password. If a valid password is entered, the
level will change to Engineer. Otherwise a warning will
show. (If no engineer passwords exists, the level will
immediately change to Engineer.)
Set to
'Maint'
Set to "Set to Maintenance Level" will cause a prompt for a
maintenance password. If a valid password is entered, the
level will change to Maintenance. Otherwise a warning will
show. (If no maintenance passwords exists, the level will
immediately change to Maintenance.)
Create
Engr
"Create Engineer Password" will cause a prompt for a new
engineering password.
Delete
Engr
"Delete Engineer Password" will cause a prompt for the
engineering password to be deleted.
Create
Maint
"Create Maintenance Password" will cause a prompt for a
new maintenance password.
Delete
Maint
"Delete Maintenance Password" will cause a prompt for the
maintenance password to be deleted.
View
All
"View All Passwords" will show all passwords as long as the
function key is held down.
To Next Page
Loading...
