Operations Model 6DS-SP Planarizer
1 - 18 Version 4.0 - February 1998; Update 10/19/01
Alert Graphic:
Symbol:
• entanglement
When to be Aware:
• whenever machine parts are moving.
• during maintenance and calibration procedures involving spindle rotation, table
rotation, conditioning brush rotation, or robot movement.
Alert Graphic:
Symbol:
• pinch points
When to be Aware:
• while the table is being removed or installed.
• when moving the machine or associated equipment (as in during installation).
NOTES
• Lifting the polish table(s) presents the potential for a lifting strain hazard; use a
crane to avoid a strain. A table falling during the lifting process presents the
potential of crushing body parts; keep body parts out from under the table at all
times.
• When moving the machine or associated equipment, always use a forklift. If the
forklift is used from the front, confirm that forks extend to rear channel before
moving. If the forklift is used from either of the two sides, confirm that the forks
extend to the center channel before moving.
To Next Page
Loading...
