Maintenance Model 6DS-SP Planarizer
9 - 56 Version 4.0 - February 1998
CONDITIONING ARM SWITCH
ADJUSTMENTS
[#1 IN CONDITIONING ARM ADJUSTMENT SERIES]
DEVICE ARM UP POSITION SWITCH
A. BEFORE YOU BEGIN
TOOLS REQUIRED
• 1/2-in. open end wrench
• Phillips screwdriver
TURN MACHINE POWER ON
Follow the procedures detailed in the Operator Functions chapter of the 6DS-SP
Operations manual.
B. CHECK CURRENT CALIBRATION
1. At Page 2 of the Manual Control Menu, select Cond Arm Up/Dn and
choose Up to raise the arm.
To Next Page
Loading...
