Strasbaugh Mechanical Maintenance Procedures
Version 4.0 - February 1998 9 - 99
SHUTTLE REAR STOP AND REED
SWITCH ADJUSTMENT
A. BEFORE YOU BEGIN
Tools Required
• 9/16-in. socket wrench
• 9/16-in. open end wrench
• 1 1/8-in. open end wrench
• precision scale (accurate to .03125 in.)
• flat blade screwdriver
• straight edge
• 3/16 in. hex key
Turn Machine Power On and Perform Home Sequence Routine
Follow the procedures detailed in the Operator Functions chapter of the 6DS-SP
Operations manual.
To Next Page
Loading...
