Strasbaugh Machine Description
Version 4.0 - February 1998 2 - 23
Calibration/Configuration Menu
Values involved in machine calibration and configuration are entered at this
menu. Calibration refers to adjustments made by technicians (such as servo
positions, force scale factors, etc.). Configuration refers to settings that are
either dictated by machine options installed or settings that are seldom
changed, such as units of force measurement. For further information, refer
to the Software Calibration chapter of the 6DS-SP Maintenance manual.
Homing Menu
The machine is homed at this menu. For further information refer to the
Operator Functions chapter of the 6DS-SP Operations manual.
Password Menu
Changing of password levels, creation of passwords, and deletion of
passwords is done at this menu. For further information, refer to the
Machine Setup chapter of the 6DS-SP Operations manual.
GEM/SECS Menu
This menu supports the GEM (SEMI Generic Equipment Model for
Effective Factory Automation) / SECS (SEMI Equipment Communication
Standard) option. For further information, refer to the separate 6DS-SP
SECS / GEM Interface manual.
Alarm Log
The Alarm Log Menu logs the most recent 32 alarms that might indicate
machine trouble. For further information, refer to the Troubleshooting
chapter of the 6DS-SP Operations or Maintenance manual.
To Next Page
Loading...
